Fiber Optic ATR-Probes (Shaft-in-shaft design)

Main features

Fiber assembly is easy detachable.
No need to retract the whole probe out of the fermenter, just pull the fiber assembly out of the operational shaft and store it separately.
Sealing the operational shaft is possible for the sterilization, cleaning, deactivation or any other treatment.

Artphotonics_Sale from stock Probes March 2026

Description

Sterilizable ATR Fiber Probe is a new product of art photonics’ FlexiSpec® product line. These ATR Probes are produced with any type of ATR element and for any type of FTIR spectrometers.

Unique Shaft-in-Shaft design enables use of FlexiSpec® ATR Probe in Bio process where sterilization is required without having to forgo the renown advantages of Mid-IR FTIR spectroscopy.

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

Unblock content Accept required service and unblock content

For more information please visit our “Downloads” section and find relative articles at our “Publications” page.

Specs

Common Parameters of Fiber Optic ATR-Probes
Total Length	1.5m (opt.:1m to 5m)*
Shaft Length	300mm (opt.: 100-700 mm)*
Shaft Diameter	12mm, 6.3mm (opt.:3mm)
Shaft Material	Hastelloy C22
Length of Legs	500mm (opt. 200 – 500mm)
Protective Tube Material	Liquid Tight SS-Conduit, KOPEX-Tube
Minimal Bending Radius	130mm
Input / Output Connectors	Long SMA (opt.: any other type)
Compatible Process-Interfaces	Ceramat-FOS or SensoGate-FOS**
Customized dimensions are available on request *Available for 12mm shafts only

Specification of Fiber Optic Immersion ATR- Probes
Probe type	Di- ATR	Si- ATR	ZrO₂- ATR
Transmission range	5.2-17μm 600-1900 cm-1	3.2-17μm 600-3100 cm-1	1.1-6.5μm 1550-9000 cm-1
Fiber type	PIR-900/1000 Silver Halide	PIR-900/1000 Silver Halide	CIR 500/550 Chalcogenide glass
Temperature range	-100°C / + 140°C	-100°C / + 140°C	-100°C / + 90°C
Pressure (max)	200Bar (300 Bar) on request	100 Bar	100 Bar

Downloads

art photonics - mid-IR ATR Probe Shaft in Shaft - Flyer

art photonics - ATR_crystal choice -Technical Note

art photonics - how does ATR probe work -Technical Note

art photonics - Fiber optic probes - Catalog

Applications

Reaction Monitoring in real time
Process Analytical Technologies (PAT)
Remote Polymerization Control
Crystallization Process Screening
In-situ IR-Spectroscopy for PAT in Chemical, Petrochemical, Atomic, Biopharmaceutical & Food Industry

Inquiry

Do you have any questions about this or any other product? Send us an inquiry, and our personnel will answer your question as soon as possible.

Fiber Optic ATR-Probes (Shaft-in-shaft design)

Description

Specs

Downloads

Applications

Inquiry

Related products

Fiber Optic ATR-Probes

Fiber Optic ATR-Probes for Lab Applications

Chalcogenide Mid-IR Fibers

Hollow Glass IR-Fibers