We are pleased to share with you the upcoming events in which we will be participating. Meet you there !
You´re welcome to visit us at our next event at SPIE. Photonics West in California USA.
With its specific range of products for the development and production as well as industrial application of optical components, optomechanics, optoelectronics, fibre optics, optical fibres, laser components and manufacturing systems, Optatec has firmly established itself in the industry and offers a platform for suppliers and users to meet at the highest level.
Welcome to visit art photonics stand (Hall 8 - Stand F117) at Optatec International Trade Fair for Optical Technologies.
October 18-20 | 2022 | Frankfurt, Germany
Join us at analytica 2022 - World's Leading Trade Fair for laboratory technology, analysis, biotechnology and analytica conference.
We will demonstrate the variety of artphotonics' high-performance spectroscopy products including the latest fiber optic probes and fiber probe couplers.
Visit our Booth #214 in Hall A2, at Trade Fair Center Messe München, from June 21-24, 2022
REGISTER NOW
25th World's Leading Trade Fair for Components, Systems & Applications of photonics | April 26-29, 2022 | Messe München
In the spring of 2022, Munich will once again be the hub of the international photonics industry for a few days. From April 26 to 29, the World’s leading trade fair LASER World of PHOTONICS 2022 will be opening its doors at the Munich exhibition grounds and be a key milestone in driving forward the upswing in the industry.
Welcome to visit us at Hall A6, Booth 230 and discuss the latest inventions in fiber photonics
University of Washington | Rome Center Piazza del Biscione 95 | Rome, Italy
Utilization of New Processing Concepts to Support the Demand for Sustainable Materials in a Circular Economy, often enabled by Exploring New Reaction Routes for Continuous Flow Processing Aided by Real-Time Monitoring Technology
Overview and Workshop Theme: A key enabler of the move to a Circular Economy will be process intensification which offers much more efficient processing for the sustainable production of lower volume distributed waste streams to generate a broad range of new platform chemicals including a growing list of biomass mass derived molecules.
Using new chemistries and catalysts these new starting materials including nanomaterials are being converted to a range of new composites and materials with advanced properties. The 2021 Rome meeting will build on this theme of sustainable production and will focus on next generation materials.
Dr. Viacheslav Artyushenko, the President of "art photonics" GmbH will have a talk on "Fiber Spectroscopy Tools to Use in PAT Applications" on 21st March.
MIRACLE is the first mid-infrared attenuated total reflection (MIR-ATR) arthroscopy system for real-time, in-depth, clinical examination and diagnosis of degenerative joint diseases, that can be used in clinical cases where patients are recommended to undergo arthroscopy surgery.
MIRACLE device will allow orthopedics surgeons to obtain real-time information about the biochemical composition of the cartilage tissue, leading to objective decision-making on the most adequate treatment course, enhancing patient’s well-being and reducing the need for follow-up surgery.
See more
Raman Spectroscopy Diagnostics ex-vivo to detect tumor margins in 3D using the thinnest fiber probe. Raman Needle Probe penetrates in resected tissue ex-vivo to define oral cancer (SCC) margins for 1 cm depth within 1 s – measuring each 100 ms the ratio of water / lipids bands in HW-Raman spectrum (as its growth is SCC specific biomarker).
See more
A multispectral fiber optic probe has been developed that enables simultaneous analysis of various liquid and solid samples using attenuated total reflection mid-infrared spectroscopy and fluorimetry. The probe design was optimized using ray-tracing simulation of the light propagation.
Technical evaluation of the probe has confirmed its output signal quality that was comparable to that of respective probes for single methods. The capability of the probe to deliver complementary chemical information from the same measurement point has been illustrated using model samples of biological tissue. Qualitative analysis of the biological tissue is one of the most important applications of the developed multispectral probe.
Read more at Analytical Chemistry Website
Remote measurement of mid-IR spectra for solids and powders is now available with art photonics Touch ATR fiber optic Probe for FTIR spectrometers. The probe has a flat top ATR crystal easy to press to soft solids or powders and get spectra from the surface without sampling. Touch ATR Probes are useful in Quality Control, research, forensic and many other applications. Probes are available either in chemically durable design with Diamond tip or for laboratory.
art photonics GmbH introduces new product – ATR fiber probe for harsh and hazardous environment (high temp, pressure, pH, vibration, etc.) with 12mm diameter shaft (for industrial application) and 6mm diameter shaft (for lab applications).
These Fiber Optic ATR-Probes can be used for process-spectroscopy either in Near- or Mid-IR range for in-situ and in-line reaction monitoring in a broad temperature range from -150° to +250°C. They resist to vacuum and high pressure up to 200Bar and can be coupled with FTIR or any other IR-spectrometers and spectral sensors for the automated process control.
Main features:
- High throughput in selected ranges of Near- or Mid-InfraRed spectrum
- ATR-crystal shaped for immersion in liquid flow without dead zone.
- Robust for industrial and lab applications up to 250°C
- Resistant to high pressure (up to 200Bar)
- Resistant to aggressive mixtures
- Compatible with all spectrometers and automated process-interfaces
To see more about the product – click here!
